Kenmore Refrigerator Refrigeration Cycle

More Detail Here: Air Cooled Water Chillers Kenmore refrigerator refrigeration cycle by Gil Hagemann Mechanical refrigeration will be executed by continuously moving, evaporating, and condensing a predetermined supply of refrigerant within a sealed system. Evaporation

Kenmore refrigerator refrigeration cycle

by

Gil Hagemann

Mechanical refrigeration will be executed by continuously moving, evaporating, and condensing a predetermined supply of refrigerant within a sealed system. Evaporation transpiring at low pressure soaks up heat, leading to low temperature. Condensation at high pressure produces the heat it soaked up throughout evaporating, at a high temperature. Therefore the moving gas conducts the heat from one place to another.

The crucial elements which create the refrigeration system are:

1. The evaporator as well as cooling unit.

2. The pump or compressor.

3. The condenser

[youtube]http://www.youtube.com/watch?v=YNeoFebbU6I[/youtube]

4. A liquid metering device (Restive)

5. A refrigerant.

Operation happens in this sequence:

1. The compressor lowers pressure to the liquid refrigerant inside the evaporator till it boils, forming a vapor. As the compressor continues to take away the vapor reducing the pressure, the temperature within the evaporator reduces till a pressure level is reached at which the inbound liquid level balances the vapor being withdrawn and a stable temperature results.

2. The compressor, that has withdrawn the vapor, compresses it inside the condenser to a pressure that will make its temperature over the room air temperature. Heat in the vapor will pass through the condenser to the cooler room temperature, resulting in the refrigerant vapor to condense into a liquid.

The working temperature of the condenser will be as much degrees over room temperature as it is required to dissipate heat absorbed inside the evaporator and compressor.

3. The liquid metering device is a reduction to the flow of refrigerant from your condenser towards the evaporator. The amount of reduction establishes the rate of flow of refrigerant to the evaporator.

Consequently the combination of components and also a refrigerant are combined in a nicely balanced process to supply refrigerant at some established temperature.

The ensuing working temperature are usually in a different range for any kind of refrigerant using piece of equipment. Specially, water coolers, dehumidifier, air conditioners, refrigerators, and freezers all of work on this basic cycle. Only the working range will be different. For example, there is no need for pressure to be too low within a water chillier because ice is not needed, merely cool water. (About 40 degrees)

The wine cooler and also your beer coolers run on the identical working procedures the pressure on the low side may be different from your house refrigerator system were the pressure on the low side will be 3-5 lbs utilizing 134a refrigerant. Were as the wine cooler and bear cooler can operate 12-15 lbs of pressure on the operating compressor low side using 134a refrigerant. If you have any queries head over to on-timeappliance.com

If your having trouble with your refrigerator and live in the Dallas, Plano or Richardson Tx. area Click here for help.

Refrigerator repair in Dallas Tx.

or

Refrigerator repair in Richardson Tx.

or

Kenmore refrigerator repair in Dallas Tx.

Article Source:

ArticleRich.com